Tips for Overhead TIG Welding:

Following are the major instructions to be taken care of by the welders about the overhead TIG welding technique:-

 Broaden the electrode far as possible to obtain the correct torch angle  Control the electrode sharp, and if suppose gets cracked up, sharpen or replace it with a new sharp one

 A flex head welding torch guides you to get the torch body far sufficient away from the hot metal

 Retain a tight arc… keeping same as electrode diameter used or more tighter

 To weld a thicker metal… use several passes

 The lay wire technique is prominent but dipping the rod is more preferable for ensuring diffusion in the root pass

 While dipping, guard the hot tip of the rod concealed with the argon as of the tig cup

 A gas lens works extremely well but not forever essential

Overhead-welding1

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s